Ladder Frame

After looking through the illustrated building guide to the OZ PDRacer I noticed a nifty ladder frame on legs they used for all sorts of things. As I only has a couple of saw horses and 6mm ply is as floppy as a wet biscuit until it's framed up I decided I needed to make one for myself...

The mess I work in (my fault - I should get it organised but given the choice between building a boat and tidying the shed....)

First I needed to extend the saw horses with some 4x2s and screws.

Then build a ladder frame with a few screws, some 35x70 pine, and a scrap of 12mm ply to keep it all square.

And so it's done, note the nifty shelf for plans and tools. Works like a charm.